This post is brought to you by Bimba Technical Tips.
By selecting the right cylinder mounting, you optimize cylinder strength, efficiency and alignment. Let’s look at the two major types of mounts -- pivot and rigid -- and how they help avoid side load problems.
There are several types of pivot mountings including clevis, pivot and trunnion. To realize the benefit of a pivot type mounting, it’s essential that a rod eye or rod clevis be used on the piston rod. Otherwise, it becomes a “rigid” mount cylinder, negating the benefit of the pivot. It’s also important that the axis of all the pivot pins in a set are parallel, or binding and side loading will occur. Long stroke pivot mount cylinders require stop tubes and dual pistons to spread out the distance between the rod bearing and piston to reduce the load at these two points. Trunnion mounted cylinders require that pillow blocks or mated bearings be fitted as close to the head of the cylinder as possible to minimize bending stresses in the head.
There are a number of rigid mounts available: side-mounted, nose-mounted, flange-mounted and face-mounted cylinders. Each must be carefully aligned with the direction of the load travel to avoid side loads. If, for some reason, proper alignment cannot be achieved, a rod end connection that allows for some lateral misalignment should be used.
Proper mounting is just one factor to consider when specifying and installing a cylinder.