Industrial Automation and Motion Control Blog | The Knotts Company

The current 80/20 Aluminum extrusion catalog is over 2" thick! There is an enormous amount of information packed in over 1200 pages. Finding what you need doesn't have to be a challenge. We are going to step through some tips and tricks on how to navigate the 80/20 Catalog.

Acceleration: Rate of change of velocity; the speeding up of a motion.

Back Pressure: The pressure of fluid in the exhaust lines tending to restrict the cylinder motion or force.

Blowby: A seal failure condition wherein air pressure readily blows past the piston.

Bimba’s PneuMoment® is more than just a non-rotating actuator. It is guided, so side loads and moment loads can be handled simultaneously. It is hard coat anodized for durability, corrosion resistance, and lubricity. And its extruded exterior complements your machinery’s appearance while providing built-in switch tracks.

However, many benefits of this unique actuator are not immediately apparent:

• Designed for clean room applications 
• Flexible air supply connections 
• No pinch points 
• Flexible mounting options 
• Fits into tighter space than linear thruster 
• Weighs less than cylinder with external guide rods 

Clean Room Applications

In the end cap is a vacuum port. As shipped the cylinder vents through a filter installed in the port. For clean room service, or where venting is not desired, simply connect a vacuum hose to the port.

Flexible Air Supply Connections

Auxiliary ports (option R), unique to the PM, are incredibly useful. They allow air or vacuum to be supplied to the rear of the actuator and be conveyed internally to the front end cap for use by another device such as a gripper or rotary actuator. This simplifies the plumbing and eliminates hose snags, kinks, and fatigue especially in multi-axis applications.

The PneuMoment® has both end and side ports in the end cap, with plugs in the side ports. Order the Y option and we will plug the end ports instead of the side ports, no charge. The plugs can be removed and reinstalled, so no matter how it is ordered, active ports can be changed at will.

Safety

The PneuMoment® has no pinch points. In other words, there is no a way that a finger can be placed between moving parts.
For machinery that is open and accessible to operators, this is an important safety advantage. For this reason the PneuMoment® is often chosen to replace actuators with guide rods.

Flexible Mounting

Mounting can be via the base, front, or optionally via an end flange.

Built-in Stroke Adjustment

Internal stroke adjustment, available for all bore sizes except the 17 and 50, adjusts extend and retract separately. For stroke
adjustment on 17 and 50 bores use Option EB – external bumpers. External bumpers reduce noise and limit stroke, internalbumpers reduce noise only. Shock absorbers are available to absorb kinetic energy and limit stroke.

Dorner Conveyors are constantly bringing new products to the market and expanding current product lines. Their products fit in a multitude of applications and it is important to specify the correct conveyor.

KnottsTech Automation and Control Expo was a success!

It was a beautiful spring day and everyone came out to see what was new in the world of automation and controls.  The regional sales managers from Omron, Dorner, and IAI were in attendance along with our own Steve Harrold.  Knotts Company product specialists Mark Howe and Mark Guida demonstrated the new product demos on hand.  

American Actuators, Inc. (part of the Precision Technology Group) is pleased to extend the range the VICTORY Series of actuators with versions specifically designed to meet the requirements of industries including food and beverage production, food packaging, and pharmaceutical equipment. These industry applications are harsh on general purpose actuators due to the caustic cleaning agents and high pressure washdown regiments. 

Dorner 2200 and 2300 Series low profile belt conveyors now come with a new modular plastic belt small-pitch option that provides nosebar transfers as tight as 0.31”. The tight nosebar transfers, combined with the industry leading compact conveyor design, makes this offering an ideal solution for infeed and outfeed to machinery, as well as unit handling within the machine.