Industrial Automation and Motion Control Blog | The Knotts Company

This post is brought to you by Bimba.

Challenge:

A customer was looking for a compact design that could produce high forces in a clamping application. Solutions they had tried from other companies were causing the parts to be scratched when they were clamped.

Topics: bimba, actuators, diaphragm actuator

This post is brought to you by Bimba.

Challenge:

A printer needed to extend a part with very little rotation in a tight space for a labeling application, to make sure the label was straight. The current process is causing the labels to be applied at all different angles, making them hard to read.

Topics: bimba, cylinder, labeling application, non-rotating spine cylinder, printing

This post is brought to you by Bimba.

Topics: bimba, solutions, Pneumadyne, valve

This post is brought to you by Bimba.

Topics: bimba, solutions, mead, TRD

This post is brought to you by Bimba.

Challenge:

A customer desired an all-composite cylinder for their semiconductor application that could withstand the harsh environment of hydrochloric acid fumes used for surface cleaning. This required both the cylinder rod and body to be made of, or coated in, plastic.

Topics: bimba, solutions, bimba solutions, composite cylinder, harsh fumes

This post is brought to you by Bimba.

Challenge:

Antennas are critical to ensure optimal radio frequency coverage. For a connected functional network they need to work over a wide range of terrains and in many different environments. One of the main environmental challenges is moisture accumulation from fluctuations in temperature and pressure. Moisture accumulation generally occurs at the top of a tower and can lead to signal interference or even complete failure of the link.

Topics: bimba, bimba solutions, desiccant drier, radio frequencies

This post is brought to you by Bimba.

Challenge:

A manufacturer of automotive lift devices contacted Pneumadyne to re-design a component used in their pneumatic circuit. Their previous valve consisted of four plastic components which were prone to breaking in the device. Although simple in design, the valve had to control the amount of flow allowed into the lift in order to control the speed of the lift.

Topics: bimba, Pneumadyne, bimba solutions, lift device

This post is brought to you by Bimba.

Challenge:

A manufacturer of biological and medical laboratory test equipment has historically used a small Bimba Flat Square II cylinder in their compact analyzer for clinical diagnostics. The cylinder moves a needle vertically to prepare samples on a small plate that is about the size of an index card, and holds approximately 100 samples. After one sample cycle is complete, the plate indexes to the next location until all samples are prepared. When the testing needed to increase the number of samples to over 300 with the same size plate, greater precision in a smaller foot print was needed.

Topics: air cylinder, bimba, bimba solutions, cylinder

This post is brought to you by Bimba.

Challenge:

A Mettler Toledo IND560 weighing terminal which was used in a cleanroom Class GMP B needed to be equipped with a pinch valve to automate a glass bottle filling process. Due to the environment, a solenoid operated pinch valve in stainless steel was required. The pinch valve had to communicate with the weighing terminal and close when the pre-defined set point was reached. The weighing terminal didn’t provide enough Amps to power the pinch valve, so an independent power supply was installed as well.

Topics: bimba, bimba solutions, bottle filling, pharmaceuticals

This post is brought to you by Bimba.

Topics: bimba, solution, manufacturers, print head